Plenty of our work is not a one-off. It is the same bracket, the same frame, the same cleat or the same component, made over and over to the same drawing. Whether that is 10 off, 100 off or 1,000 off, it is work we take on and work we are set up for.

That suits the way we work. A repeat component needs a clear method, a sensible setup and a workshop that can keep producing the same result as the numbers climb. For construction companies, main contractors, shop fitters, bar fitters and other fabricators, that can mean one less part of the job to worry about.

Why repeat work suits a fabrication workshop

When a part is going to be made many times, the way it is made matters more than the part itself. The first one is always the slowest. We need to decide the method, check the drawing and work out the order of operations.

Once that is sorted, the job becomes about repeatability: every part coming out the same as the last. Good preparation makes the work easier to check, easier to plan and easier to keep moving. It also means that any useful improvement to the method benefits every part that follows.

Jigs and fixtures make the difference

A jig is a purpose-made frame, plate or fixture that holds parts in exactly the right place while they are tacked and welded. It gives the component a fixed reference, so the person making it is not measuring every position from scratch each time.

With a good jig, every component comes out square and identical. Holes line up, and parts from different batches still fit together. That means less rework, fewer surprises on site and a consistent finish across the whole order.

Where a repeat run justifies it, we build the jig before we build the parts. The jig is part of the job, not an extra nobody wants to pay for. It is the bit of workshop preparation that helps the full run arrive right.

10 off, 100 off, 1,000 off

The same approach scales. Small repeat runs get a simple, worked-out method and a basic jig. Bigger runs get proper fixtures, batch planning and a sensible order of work so the throughput stays steady.

When numbers climb into the thousands, we plan it as a production run rather than a series of one-offs. Material can be ordered in one go, parts can be cut in batches and welding can be staged so nothing bottlenecks. The point is simple: we can cope.

That production mindset also helps when the order is released in stages. We can agree what needs to be made first, keep the method consistent and make the next batch without starting the thinking all over again.

What we need from you

To price and plan repeat work properly, we need:

  • A clear drawing, or a sample of the original part.
  • The quantity, including whether it will be released in batches.
  • The material and finish.
  • Any tolerance or fit that actually matters.

If the original drawing is missing, that is not necessarily a problem. We can reverse-engineer from a sample part, check the important dimensions with you and work up a practical route to making it again.

Why repeat work is good for both sides

For the customer, repeat work means a known price, a known quality and a supplier who already knows the part. You do not have to explain the component from scratch every time an order comes around, and you have a clear point of contact when the next batch is needed.

For us, it means we can invest the workshop time in doing the setup properly because we know the work is coming back. The first run creates a better method for the next one, and the relationship gets more efficient as both sides learn what works.

Where it fits

Repeat components we have made include:

  • Brackets and cleats.
  • Base plates, frames and supports.
  • Railing and gate components.
  • Shelving and display frames.
  • Sheet metal parts such as trims, covers and enclosures.

That can sit alongside our structural steel fabrication, sheet metal work or bar fitting and subcontract fabrication, depending on what the part is and where it is going next.

A repeat subcontractor you can rely on

We are based in Sheffield and work with customers across the UK. We are happy to be the subcontractor who just keeps making the part, so your own shop, site team or installation crew can get on with other work.

Tight deadlines met — we go the extra mile to ensure your work is completed on time.

Send us the drawing, sample or first set of details and we can talk through the quantity, the method and the best way to keep the run moving.